500 GALLON LOX TRAILER

The 500 Gallon LOX Trailer is a mobile liquid oxygen storage tank assembly.  Designed for the transport and storage of LOX at airbases and military installations, the 500 Gallon LOX Trailer provides a logistics solution for flight line LOX requirements.

The 500 Gallon LOX Trailer can be used with all Essex LOX Converters, BMOS, BMOS-FS, MMOS, NPTLOX, PTLOX and 50 Gallon LOX Carts.

A 500 Gallon LIN Trailer for the transport and storage of liquid nitrogen is also available.

Both 500 Gallon Trailers are qualified to Air Force PD13WRGRVEA05 and tested to MIL-STD-810.

Click here to watch a 500 Gallon LOX Trailer video.

If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.

LIN FILLER VALVES

LIN Filler Valves are specifically designed to service liquid nitrogen (LIN) systems for military aircraft.  They automatically open and close when activated by the mating component.  Pin quantity and size variations are provided for proper coupling.  Valves can be modified to meet specific customer requirements. Perform in accordance with MIL-PRF-38201.

LOX FILL, BUILDUP AND VENT VALVE

The LOX Fill, Buildup and Vent Valve is a semi-automatic valve that provides a safe means to control flow during filling operation of liquid oxygen converters. A specially-designed valve connection mates with standard LOX ground handling devices. When coupled to this device, the internal valve mechanisms simultaneously allow for the venting of oxygen gas within the converter and the transfer of liquid oxygen into the converter. When disconnected, these mechanisms automatically close, allowing the pressure build-up process to begin. The Essex LOX Fill, Buildup and Vent Valve is a CRU-50/A connection and is QPL approved to MIL-V-25961.

LOX CHECK VALVE

The LOX Check Valve is designed to operate with either liquid or gaseous oxygen.  An elastomer seal ensures zero leakage when the application  involves gaseous oxygen.  The valve has an operating pressure of 300 psi and a temperature range of -300°F to +260°F.

LOX FILLER VALVES

LOX Filler Valves are specifically designed to service liquid oxygen (LOX) systems for military aircraft.  They automatically open and close when activated by the mating component.  Pin quantity and size variations are provided for proper coupling.  Valves can be modified to meet specific customer requirements. These LOX valves are designated as CRU-59/E.  They perform in accordance with MIL-PRF-38201.

CRYOGENIC HIGH PRESSURE CLOSING VALVE

Cryogenic High Pressure Closing Valves are designed for use on Air Force and Navy liquid oxygen converters as well as other cryogenics systems with operating pressures of less than 300 PSIG.  The pressure closing valve allows the cryogenic system to maintain operating pressure while in use.

CRYOGENIC LOW PRESSURE CLOSING VALVE

Cryogenic Low Pressure Closing Valves are designed for use on Air Force and Navy liquid oxygen converters as well as other cryogenics systems with operating pressures of less than 130 PSIG.  The pressure closing valve allows the cryogenic system to maintain operating pressure while in use.

LOX QUICK DISCONNECT COUPLING

The LOX Quick Disconnect Coupling allows for the rapid disconnect and connection of aircraft LOX converters to enable servicing.  This self-sealing coupling is designed in accordance with MIL-C-21049.