High Pressure Cylinders operate at pressures ranging from 1800 to 2100 psig. A range of sizes and configurations are available, some designed and tested to Military Specifications.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The Purge Kit removes moisture from cryogenic vessels, system lines, valves and their components when coupled with an adequate supply of pure gaseous nitrogen, oxygen or air. The kit includes a heater assembly, power cord, 4′ flexible hose, 1′ flexible hose and filler valve adapter. The Purge Kit may be used on any Essex LOX systems if/when they require purging.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The Next Generation Portable Therapeutic Liquid Oxygen System (NPTLOX) is a low pressure portable 20.0 liter liquid oxygen storage and gaseous delivery system, capable of supplying up to 17,200 gaseous liters of oxygen at a maximum flow rate of 66 liters per minute at 50 psig. The unit features six quick disconnect outlet ports and comes with an accessory kit containing three 20 foot medical grade hoses, three flow control valves, three humidifier bottles, and three quick disconnect adapters. With six flow control valves attached, it can deliver oxygen to six patients at flow rates from .5 to 15 liters per minute. The quick disconnect outlet ports can also supply 50 psi of oxygen to other medical devices or to oxygen regulators for additional patients. The NPTLOX has been successfully tested to work in tandem with commonly used ventilators. Weighing 155 pounds when full, the NPTLOX can be carried by two ground support personnel using the four-position locking handles. It can also be mounted in an aircraft. The NPTLOX requires no external power and uses just two 9-Volt batteries for the quantity indicator. The system has been tested to MIL-STD-810.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The Mounted Medical Oxygen System (MMOS) is a low pressure, portable 4.0 liter liquid oxygen storage and gaseous delivery system, capable of supplying up to 3440 gaseous liters of oxygen at a maximum flow rate of 30 liters per minute at 50 psig. Two built-in flow control valves deliver oxygen to a patient at flow rates from 0.5 to 15 liters per minute. Two accessory ports can supply 50 psi of oxygen to other medical devices or to oxygen regulators for additional patients. The MMOS has been successfully tested to work in tandem with commonly used ventilators. Weighing just 35 pounds when full, the MMOS is easily carried by ground support personnel and can also be mounted in an aircraft, helicopter or ground vehicle. The MMOS requires no external power and uses just one 9-Volt battery for the quantity indicator. The system has been tested to MIL-STD-810 and has FDA Life Support device 510(k) number K113767.
The BMOS-FS Hose Kit connects the MMOS to the BMOS-FS for refilling.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
A LOX Heat Exchanger warms incoming gaseous or liquid oxygen within 20 degrees of the ambient temperature prior to delivery to a pilot, aircraft crew or medical patient for breathing. A variety of sizes and configurations are available.
The LOX Fill Harness Kit connects a Liquid Oxygen Cylinder (VGL) with a LOX converter or system for filling. The kit includes a relief valve, manual vent valve, CRU-50 LOX filler valve and hose assembly in either a 10′ or 15′ length.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The Backpack Medical Oxygen System Filling Station (BMOS-FS) is a low pressure, portable 20.0 liter liquid oxygen storage device designed to fill multiple BMOS or MMOS (using the BMOS-FS Hose Kit) systems prior to use. Average filling time is approximately three minutes to fill either system. Weighing less than 125 pounds when full, the BMOS-FS can be carried by two ground support personnel or mounted in an aircraft. The BMOS-FS requires no external power and uses just two 9-Volt batteries for the quantity indicator. The system has been tested to MIL-STD-810.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The Backpack Medical Oxygen System (BMOS) is a low pressure, portable 2.0 liter liquid oxygen storage and gaseous delivery system, capable of supplying up to 1720 gaseous liters of oxygen at a maximum flow rate of 15 liters per minute at 50 psig. A built-in flow control valve delivers oxygen to a single patient at flow rates from 0.5 to 15 liters per minute. A secondary accessory port can supply 50 psi of oxygen to other medical devices or to an oxygen regulator for a second patient. The BMOS has been successfully tested to work in tandem with commonly used ventilators. Weighing just 19 pounds when full, the BMOS can be carried or worn by parachutists and ground support personnel. The BMOS requires no external power and uses just six AA-batteries for the quantity indicator. The system has been tested to MIL-STD-810.
Click here to watch the BMOS and MMOS Instructional Video on Inspection, Filling, Draining and Purging.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The 75 Liter LOX Converter supplies up to 64,500 gaseous liters of oxygen to a aircraft pilot and crew at 300 to 380 psig. This base-mounted, compact converter weighs approximately 85 pounds empty and 275 pounds full. An interface panel connects all the necessary external plumbing, including the fill/combo valve, heat exchanger, overboard vent and LOX quantity gauge. The converter is designed to MIL-DTL-25666/6 and tested to MIL-STD-810.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
The 7 Liter LOX Converter is designed as a modular system to supply oxygen to one or several patients on aircraft transport. The converter can replace a high pressure cylinder installation on a helicopter and mount in the same envelope. When space is not available, this unit can also be installed on the outside of the aircraft.
The 7 Liter LOX Converter supplies up to 6,020 gaseous liters of oxygen at 75 to 120 psig. Weighing 21 pounds empty and 39 pounds when full, the converter has one quick disconnect port for the external heat exchanger, valves and plumbing, as well as one quick disconnect for the external LOX quantity gauge. The 7 Liter LOX Converter has been tested to MIL-STD-810.
If you require a Specification Sheet for our equipment, please select “Request More Info” with the product name and part number.
